Ejecutando Mavericks en un MBP de 15 ". Tengo un BeagleBone Black que ejecuta Debian Wheezy. He conectado los dos con un cable Ethernet. Tengo una conexión wifi de trabajo del MBP. conexión de WiFi a las computadoras usando Ethernet ".
Cuando ejecuto ifup eth0
en el BeagleBone Black, veo el siguiente resultado:
Internet Systems Consortium DHCP Client 4.2.2
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
[ 3916.877981] net eth0: initializing cpsw version 1.12 (0)
[ 3916.886430] net eth0: phy found : id is : 0x7c0f1
[ 3916.891796] libphy: PHY 4a101000.mdio:01 not found
[ 3916.896888] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 3916.906939] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Listening on LPF/eth0/c8:a0:30:ac:1f:f4
Sending on LPF/eth0/c8:a0:30:ac:1f:f4
Sending on Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
[ 3918.891594] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[ 3918.899032] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
Viendo la salida de Console
en mi MBP, puedo verlo haciendo something
1/7/14 12:05:00.590 PM bootpd[18547]: DHCP DISCOVER [bridge100]: 1,c8:a0:30:ac:1f:f4 <arm>
1/7/14 12:05:00.590 PM bootpd[18547]: OFFER sent arm 192.168.2.9 pktsize 300
1/7/14 12:05:00.590 PM bootpd[18547]: service time 0.000651 seconds
1/7/14 12:05:00.590 PM bootpd[18547]: service time 0.000005 seconds
1/7/14 12:05:03.873 PM configd[16]: inet_set_autoaddr(en0, 1) failed, Resource busy (16)
1/7/14 12:05:04.137 PM bootpd[18547]: DHCP DISCOVER [bridge100]: 1,c8:a0:30:ac:1f:f4 <arm>
1/7/14 12:05:04.137 PM bootpd[18547]: OFFER sent arm 192.168.2.9 pktsize 300
1/7/14 12:05:04.137 PM bootpd[18547]: service time 0.000519 seconds
1/7/14 12:05:04.137 PM bootpd[18547]: service time 0.000002 seconds
1/7/14 12:05:10.296 PM bootpd[18547]: DHCP DISCOVER [bridge100]: 1,c8:a0:30:ac:1f:f4 <arm>
1/7/14 12:05:10.297 PM bootpd[18547]: OFFER sent arm 192.168.2.9 pktsize 300
1/7/14 12:05:10.297 PM bootpd[18547]: service time 0.001206 seconds
1/7/14 12:05:10.298 PM bootpd[18547]: service time 0.000007 seconds
1/7/14 12:05:24.813 PM bootpd[18547]: DHCP DISCOVER [bridge100]: 1,c8:a0:30:ac:1f:f4 <arm>
1/7/14 12:05:24.814 PM bootpd[18547]: OFFER sent arm 192.168.2.9 pktsize 300
1/7/14 12:05:24.814 PM bootpd[18547]: service time 0.000829 seconds
1/7/14 12:05:24.814 PM bootpd[18547]: service time 0.000004 seconds
1/7/14 12:05:32.405 PM bootpd[18547]: DHCP DISCOVER [bridge100]: 1,c8:a0:30:ac:1f:f4 <arm>
...
No sé a dónde ir desde aquí. Sé que si conecto el BBB directamente en mi enrutador Netgear, entonces obtiene una dirección IP a través de DHCP. Por lo tanto, no sé si el problema está completamente relacionado con el uso compartido de Internet de Apple, pero es al menos parte del problema, porque BBB, Just Works (tm) de lo contrario.